We are going to fix the iPhone 6 plus with some faults, first problem it that we can't turn it on and the constant current is shown as 70mA. It was repaired before as its unresponsive touch.
When soldering touch chip, the front camera socket dropped because the air gun had higher temperature. After soldering front Camera FPC Connector socket, I found that the front camera still could not be used. I blew the area near fingerprint socket. It cannot be turn on completely.
When soldering touch chip, the front camera socket dropped because the air gun had higher temperature. After soldering front Camera FPC Connector socket, I found that the front camera still could not be used. I blew the area near fingerprint socket. It cannot be turn on completely.
Customer only sent the motherboard, so I energize it and test. The constant current is 70mA and it stops.
Based on my experience, constant current stops at 70mA mainly because of the bus. I go on to measure the diode data of bus voltage. The data is normal. Many reasons can lead to turn on failure. If we want to narrow the problem scope, we can use root method. The customer agrees me to root. It reports unknown error (4005). Based on my experience, I know that CPU or temporary storage, as shown in the picture.
The major point of soldering CPU lies in the treatment to the top of the CPU lower board, as shown in the picture.
After soldering the CPU lower board, assemble the iPhone and test. The current is normal. I continue to assemble the temporary storage, finding that the current still stops at 70mA, which is abnormal. Obviously the problem lies in temporary storage, as shown in the following picture. Then I turn it on to test. All the functions are normal. Trouble is removed.
That's the complete process for the iPhone 6 plus repair, more cell phone maintenance skills check at www.vipfixphone.com
The major point of soldering CPU lies in the treatment to the top of the CPU lower board, as shown in the picture.
After soldering the CPU lower board, assemble the iPhone and test. The current is normal. I continue to assemble the temporary storage, finding that the current still stops at 70mA, which is abnormal. Obviously the problem lies in temporary storage, as shown in the following picture. Then I turn it on to test. All the functions are normal. Trouble is removed.
That's the complete process for the iPhone 6 plus repair, more cell phone maintenance skills check at www.vipfixphone.com
评论
发表评论