跳至主要内容

iPhone 6 Plus LCD No display: CPU Issue Repair

We received an iPhone 6 Plus with some faults. According to customer's description, the iPhone 6 Plus LCD screen has no display and no light, it has changed the kit before. How to solve the faults? We need to solve this problem step by step.


1. Measure the working condition of iPhone LCD display IC, all is normal. Then measure the display socket J2019 with Fluke 15B+ Digital Multimeter, we found the #3 pin is short circuit. 90_AP_TO_LCM_MIPI_DATA3_N MIPI image transfer data bus leads directly to CPU, the initial diagnosis is that the CPU is continuous tin or internal damage.


2. Remove iPhone CPU and then measure this signal line, we found it is the earthing short circuit, which is CPU internal damage, the kit is damaged. 6P and 6 are not the same size; the circuit design is also not the same. By analyzing the WUXINJI schematic diagram, we found the solution.



3. According to the comparison of WUXINJI schematic diagram, we found that iPhone 6 Plus has one more a set of MIPI image transfer data bus than iPhone 6, 90_AP_TO_LCM_MIPI_DATA3_P、90_AP_TO_LCM_MIPI_DATA3_N, and iPhone 6 doesn't have that line. Because the iPhone 6 only needs to display 4.7 inch images, but iPhone 6 Plus needs to display 5.5 inch images.

4. The faulty iPhone 6 Plus is 90_AP_TO_LCM_MIPI_DATA3_N short circuit, we decided to abandon the 5.5 and install the 4.7 directly. Move the CPU on this fault board to iPhone 6 motherboard, the iPhone LCD can display now！

More cell phone repair skills please visit on www.vipfixphone.com

标签：

评论

发表评论

此博客中的热门博文

Solution: iPhone X Won't Turn On

According to the customer's description, the iPhone X would not turn on after it drop accidentally. Then the cell phone reports error 56 when restore it. How did this happen? Let's test and repair step by step. Since iPhone X motherboard 2 layers are connected through the middle column, the solder points are very easy to get dropped. so we guess that the solder points from NFC chip to the CPU part have fell off. Disassemble the iPhone X by iPhone opening tools , remove the upper board off the main board, when separate the main board we see there is a row of points have fell off. Check the location map on WUXINJI dongle , it is surrounded by a ground wire, in fact, there are 6 useful points dropped. The ground wire does not need to be filled, the 6 useful points are added by professional phone welding tools. These are the signal wires of the NFC chip, so the iPhone X would report error 56. Then the tin of the middle column is repaired by iPhone X BGA reballing ste...
发表评论
阅读全文

iPhone 6 Display Failure after Replacing LCD

The iPhone 6 display is black after replacing LCD. After checking, the diode data of display socket is normal and all power supply for iPhone display IC  output is normal. Testing by  DC power supply , we find the iPhone current is abnormal. When press the iPhone power button, the boot current is obviously large. The current reached 100mA when press the power button. After remove the display tube, the current still the same, which means there is a short circuit. Measure the voltage output of each circuit of power supply with Fluke 15B+ Digital Multimeter , then surprised to find that there are really short circuit places. LD010 is short circuit; we suspect that the filter capacitance on the circuit has been penetrated. After remove the iPhone power control IC , we found it is ground short circuit. Open the WUXINJI Dongle  to check the iPhone schematic circuit, we found that this circuit is the display card image transmission MIPI data bus power supply. CPU brea...
发表评论
阅读全文

Solution: Why iPhone X Voltage Keeps Jumping

After getting the iPhone X motherboard to test, we observe the current value repeatedly jumps between 0mA and 50mA on DC power supply , and it is different from the normal booting current. Next, test whether the power supply of every circuit is normal. PP_VDD_MAIN is measured 4.2V; PP_VDD_BOOST measured is 4.2V. PP1V8-ALWAYS is 1.8V, all the values are normal. But when testing PP1V1_S2, PP0V8_SOC_FIXED_S1, PP1V8_S2 and other circuit voltage that output by power chip U2700 voltage are jumping constantly. According to previous experience, voltage jump is usually caused by a power supply circuit of U2700 output. Measured with digital multimeter , there is no short circuit was found for the dipole value of all power supply to ground. We repaired iPhone 7P before and know that if crystal oscillator is false welding can also cause voltage jumping, And if iPhone CPU  power supply is abnormal also can cause voltage jumping. Check the crystal oscillator we find no problem, then check th...
发表评论
阅读全文