跳至主要内容

Solution: iPhone 7 Won't Turn on After Water Damage

The iPhone 7 problem is that won't turn on after water damage. No matter how many times you press the iPhone power button, it still does not respond, the iPhone has been kept black screen. How to get the best solution for the phenomenon?
 
After disassembling the iPhone by JM-9102 Disassemble Tools, we can see the mist in the iPhone, so we need to handle the mist first. After it is done, measure the iPhone with DC power supply, apply some power on iPhone, and then press the Power-on button to check the boot current, it shows large current.

According to the current situation, this phenomenon should be the load of the power supply is short circuit. Now, we immediately use a method of feeling temperature to check, we found the lower part of the iPhone was hot. To narrow the scope, we can use the method of solder rosin to check, we found that one of the reserve capacitors in the light boost circuit was shorted.

With the help of YH898D hot air gun and Titanium Alloy Tweezers, we remove this capacitor, and then test it again, the current returns to normal.

However, the iPhone screen still no lights, sometimes we can see a little faint light. Using Fluke 15B+ Digital Multimeter to measure the voltage of lighting, it instantly shows 11V, then immediately turns 2.4V, sometimes turns 5V, and the voltage is very unstable. At this time, we know there's a problem with the lighting booster circuit.

Observing the iPhone motherboard under a VGA Camera 7-45X Trinocular Stereo Microscope, we found a glass-diode crack in the booster circuit. May be the user in the iPhone after the water, power on it and test, because of the continuously working, the diode is burned.

After replacing the new diode, the iPhone lights are back to normal, which means the iPhone touchscreen can be display now! 

Summary: The repairing of mobile phones is not only a theory, but also a variety of methods, such as Temperature-sensing method, Solder rosin method, and Microscope observation method, etc.

More cell phone repair details read at www.vipfixphone.com

评论

发表评论

此博客中的热门博文

Solution: iPhone X Won't Turn On

According to the customer's description, the iPhone X would not turn on after it drop accidentally. Then the cell phone reports error 56 when restore it. How did this happen? Let's test and repair step by step. Since iPhone X motherboard 2 layers are connected through the middle column, the solder points are very easy to get dropped. so we guess that the solder points from NFC chip to the CPU part have fell off. Disassemble the iPhone X by iPhone opening tools , remove the upper board off the main board, when separate the main board we see there is a row of points have fell off. Check the location map on WUXINJI dongle , it is surrounded by a ground wire, in fact, there are 6 useful points dropped. The ground wire does not need to be filled, the 6 useful points are added by professional phone welding tools. These are the signal wires of the NFC chip, so the iPhone X would report error 56. Then the tin of the middle column is repaired by iPhone X BGA reballing ste...
发表评论
阅读全文

iPhone 6 Display Failure after Replacing LCD

The iPhone 6 display is black after replacing LCD. After checking, the diode data of display socket is normal and all power supply for iPhone display IC  output is normal. Testing by  DC power supply , we find the iPhone current is abnormal. When press the iPhone power button, the boot current is obviously large. The current reached 100mA when press the power button. After remove the display tube, the current still the same, which means there is a short circuit. Measure the voltage output of each circuit of power supply with Fluke 15B+ Digital Multimeter , then surprised to find that there are really short circuit places. LD010 is short circuit; we suspect that the filter capacitance on the circuit has been penetrated. After remove the iPhone power control IC , we found it is ground short circuit. Open the WUXINJI Dongle  to check the iPhone schematic circuit, we found that this circuit is the display card image transmission MIPI data bus power supply. CPU brea...
发表评论
阅读全文

Solution: Why iPhone X Voltage Keeps Jumping

After getting the iPhone X motherboard to test, we observe the current value repeatedly jumps between 0mA and 50mA on DC power supply , and it is different from the normal booting current. Next, test whether the power supply of every circuit is normal. PP_VDD_MAIN is measured 4.2V; PP_VDD_BOOST measured is 4.2V. PP1V8-ALWAYS is 1.8V, all the values are normal. But when testing PP1V1_S2, PP0V8_SOC_FIXED_S1, PP1V8_S2 and other circuit voltage that output by power chip U2700 voltage are jumping constantly. According to previous experience, voltage jump is usually caused by a power supply circuit of U2700 output. Measured with digital multimeter , there is no short circuit was found for the dipole value of all power supply to ground. We repaired iPhone 7P before and know that if crystal oscillator is false welding can also cause voltage jumping, And if iPhone CPU  power supply is abnormal also can cause voltage jumping. Check the crystal oscillator we find no problem, then check th...
发表评论
阅读全文