跳至主要内容

Fixed: iPhone 7 White Apple Logo Stuck on Screen

When iPhone 7 restarts automatically, the white apple logo appears on the iPhone display, it can't enter the iOS system and the iPhone can flash, but the second time, iPhone 7 automatically restarts, and the flash memory process is not completed.


The iPhone 7 originally needed to repair the audio part because it could not be recorded and could not send voice at WeChat or WhatsApp. For this audio failure, we can fix it by replacing the new iPhone audio. However, after replace the iPhone audio, the iPhone 7 always white Apple reboot.
First we thought maybe it's the iPhone audio is not installed well, so we re-install the audio by QUICK 861DW hot air rework station, but after replacement, the problem is the same. We try to flash the iPhone, the flash process runs smoothly, but it won't be able to access the IOS system after the flash, re-flash the iPhone again, the iPhone automatically restarts.

Is the iPhone battery out of power? Replace the new iPhone battery, and then test it, the iPhone boot successfully， but something wrong, the iPhone battery power percentage is not right. Now, we realized that the iPhone battery detective pin has some problem.

Use Fluke 15B+ Digital Multimeter to test it, the data tested is normal, re-test it for several times, we confirm the problem is the iPhone battery detective pin. Check the iPhone schematic diagram in the WUXINJI Dongle.

There are Q1202 and a boost resistor, the resistor tested is good, directly replace the new Q1202.

Reboot the iPhone again, all the functions work normal now!
If you want to read more professional information about cell phone repair, please contact us on www.vipfixphone.com

评论

发表评论

此博客中的热门博文

iPhone 6 Display Failure after Replacing LCD

The iPhone 6 display is black after replacing LCD. After checking, the diode data of display socket is normal and all power supply for iPhone display IC  output is normal. Testing by  DC power supply , we find the iPhone current is abnormal. When press the iPhone power button, the boot current is obviously large. The current reached 100mA when press the power button. After remove the display tube, the current still the same, which means there is a short circuit. Measure the voltage output of each circuit of power supply with Fluke 15B+ Digital Multimeter , then surprised to find that there are really short circuit places. LD010 is short circuit; we suspect that the filter capacitance on the circuit has been penetrated. After remove the iPhone power control IC , we found it is ground short circuit. Open the WUXINJI Dongle  to check the iPhone schematic circuit, we found that this circuit is the display card image transmission MIPI data bus power supply. CPU brea...
发表评论
阅读全文

Iphone 6S Enters DFU Mode Cannot Start Fault Repair

The customer said that he did not know what the reason was. The mobile phone has been restarted indefinitely and can enter the DFU mode. However, when the flashing machine fails to enter the recovery mode from the DFU mode, and then the mobile phone is connected to the computer for 5-10 minutes, it automatically enters the recovery mode. After we received the 6S that could not be started, we disassembled the power with iphone engraving tool and turned on the power to 100mA. First of all, check if you can connect and read the DFU mode after connecting to the computer. Wireless DFU can not exit, we can only brush the machine to view the error. Refresh Aisi and iTunes respectively. If you stuck on the progress bar for a long time, it is very likely that the error is -1. If the progress bar does not enter, you can roughly determine the probability of a CPU failure. Now we need to see if there is a problem with the hard drive. First, use DC power supply for iphone repair, the hard disk o...
发表评论
阅读全文

Tutorial: iPhone 6S Plus Backlight Repair

Since the size of iPhone6s plus screen display  is large, it's necessary to use two sets of background lights to supply power, one is provided by U4020, the other is provided by U4050. 2  sets of circuit 1) PP_LCM_BL_ANODE,     PP_LCM_CAT1, PP_LCM_BL_CAT2 2) PP_LCM_BL34_ANODE,  PP_LCM_BL_CAT3, PP_LCM_BL_CAT4 For PP_LCM_BL_ANODE and PP_LCM_BL34_ANODE, if one of the circuit has no voltage value, it will cause the iPhone 6s Plus screen to be half bright and half dark. For PP_LCM_CAT1, PP_LCM_BL_CAT2, PP_LCM_BL_CAT3 and PP_LCM_BL_CAT4, if one of  these four circuits gets abnormal signal, it will cause the 1/4 screen to be dark. Solution: Use jumper wire  to short connect PP_LCM_CAT1 and PP_LCM_BL_CAT2 or you can also connect PP_LCM_CAT3 and PP_LCM_BL_CAT4. The control signals of these two sets of backlights, one group of inductors FL4211 FL4212 FL4213 are sent to the display interface. The other group is sent to the display interface...
1 条评论
阅读全文